DIRT SEPARATOR WITH MAGNET FOR UNDER-BOILER INSTALLATION DIRTMAGSLIM® CALEFFI 545205

DIRT SEPARATOR WITH MAGNET FOR UNDER-BOILER INSTALLATION DIRTMAGSLIM® CALEFFI 545205

CAL545205
€106.84
VAT included
Shipped in 10/12 business days
Are you interested in this item and do you need help choosing?
Request information

I read and accept privacy terms. (Read)

Data sheet

ITEM CODE (Aquaterm)
545205
Sludge separator with magnet for under-boiler installation. Suitable for non-linear installations, with crossed pipework. Technopolymer body. Drain valve with hose connector. Connector for wall connection: 3/4" M. Connector for flexible hose connection: 3/4" F. Max operating pressure: 3 bar. Temperature range: 0--90°C. The material used for the sludge separator is a technopolymer specifically selected for heating and cooling system applications. The fundamental characteristics of the technopolymer are: - high resistance to plastic deformation, while maintaining good elongation at break; - good resistance to crack propagation; - very low moisture absorption, for consistent mechanical behaviour; - high resistance to abrasion caused by continuous fluid flow; - performance maintenance across temperature variations; - compatibility with glycols and additives used in circuits. These base material characteristics, combined with the appropriate shaping of the most stressed areas, allow comparison with metals typically used in sludge separator construction. The DIRTMAGSLIM® sludge separator separates impurities contained in air conditioning systems, collecting them in a large settling chamber from which they can be discharged while the system is operating. The removable magnetic ring retains ferromagnetic impurities. Due to its compactness, this sludge separator is specifically designed for installation on horizontal pipework under wall-hung boilers where space constraints or other reasons prevent the use of traditional sludge separators. Various configurations and accessories allow the sludge separator to be installed under wall-hung boilers using the rigid pipework kit supplied by the boiler manufacturer, or using flexible hoses.

4 other products in the same category: